Category Archives: Technology

Anything technology related.

How to Install 8GB RAM in 2010 MacBook Pro Without It Freezing

The 4GB my mid-2010 13″ MacBook Pro came with just wasn’t cutting it for me anymore so I picked up a couple of 4GB DDR3 1333MHz sticks for about $40. If you’re like me, you don’t tend to pay too much attention to the nitty-gritty details of something as trivial as a RAM upgrade. Of course, I knew that my model MacBook Pro only supports up to 1066MHz DDR3 RAM, but I assumed that the faster RAM would downclock itself to match the 1066MHz limitations of the MacBook Pro itself. Unfortunately, this was not the case and when booting with 8GB of RAM, my Mac’s loading indicator would freeze when booting the OS.

I created a video on the whole process which you can view below, or alternatively click the Read More link to view a more concise version in this article.

Read MoreHow to Install 8GB RAM in 2010 MacBook Pro Without It Freezing

Apartment of the Dead (Short Film)


Here is a short film I helped make for my Introduction to the Arts class. It was inspired mainly by Left 4 Dead but also influenced by pretty much all the zombie movies out there. It takes a somewhat humorous approach at what would happen if the people most prepared for a zombie apocalypse were doomed. The editing and special effects were done by me (it was my first time to do both).


Apartment of the Dead from Tyler Milner on Vimeo.

My Computer


Just thought I’d share some pics of my current PC. I won this at Quakecon 2007, it was the “Dream Machine” sporting the following specs:

  • Intel Quad Core QX6700 Extreme Edition
  • 2GB Corsair XMS PC6400 DDR 2
  • (2) EVGA 8800 Ultra’s in SLI
  • 1200 watt Thermaltake PSU
  • Cooler Master CSX custom paint job case
  • (2) 750GB HDD’s + (1) 150GB WD Raptor
  • ASUS Striker Extreme mobo (now an EVGA 680i SLI)

The specs are still the same, the only thing I’ve done with it is add watercooling and make it pretty. This also might be useful for anyone looking to watercool a Cooler Master CSX case. I completed this project back in July of 2008, but just recently took some pictures, enjoy!

Read MoreMy Computer

Project Curdled Completed



It has been a long 7 months, but finally the CGEC is over and Project Curdled (now called Overdose) is completed. Check out the video below (although it seems someone forgot to record gameplay sound). We built an arcade cabinet for this game, but I don’t have any good pictures of the finished product so you’ll have to wait until the judging is over for me to post them.



How to Install Windows XP on the HP Pavilion DV4 – Including Drivers


I’ve never been a big fan of HP. My dad bought a HP Pavilion dv9000 a couple of years ago and the thing has completely crapped out twice despite its being used on a desk 90% of the time. My aunt’s newer HP laptop was a pain to install XP on as I had to slipstream the SATA drivers into an XP install.

Even furthering my hate for HP laptops, my friend asked me to install Windows XP on his new HP Pavilion DV4-1222nr and I had to once again search for a way to get Windows XP installed. I first tried using the custom XP CD I used for my aunt, but after being greeted with a friendly "STOP: 0x0000007B" blue screen I quickly realized that the CD didn’t work because it was made for an HP laptop with an Intel processor, I was going to have to hunt for the AMD drivers and create a new CD…great.

Read MoreHow to Install Windows XP on the HP Pavilion DV4 – Including Drivers

Use Your iPhone 3G as a Modem – Using the USB Cable!


I’ve had the iPhone 3G since it first came out. I camped out the night before, #2 in line for 15+ hours. I love my iPhone, so naturally my obsession with the device led me to jailbreak it. I’m running 2.2.1 software on there (haven’t "unlocked" it yet since I’m on AT&T for a long time), but it is jailbroken.

I’ve used PdaNet quite a bit and just recently, they released desktop software (XP/Vista only right now) that allows you to simply plug in your iPhone via USB and "pipe" the 3G Internet connection directly into your desktop or laptop. This is quite handy as you can turn off WIFI which will save quite a bit of power/heat vs the old way of tethering and also serves to charge your iPhone while sipping from its Internet connection!

About a week ago, the campus apartment Time-Warner internet here slowed to a crawl. It went from a typical 1.5Mbps connection to less than 100Kbps with huge latency spikes. I became fed up with this and decided to give the newest version of PdaNet a try.

Read MoreUse Your iPhone 3G as a Modem – Using the USB Cable!

How to Optimize XP Processes/Services for the Acer Aspire One



Last week, I showed you how to create your own minimal XP install for the Acer Aspire One using nLite. By following my config, you should be able to shave somewhere between 300 and 500MB off of your stock SP3 Windows XP install. By doing this alone, you should have a pretty minimal fresh install of XP  as a lot of unnecessary programs are already cut out, saving a few background processes along the way.


However, there are a few more tweaks we can do to your freshly cut down XP install to make it even less resource intensive. I’ll show you which background services and processes I have found pretty safe to disable, resulting in a super-minimal install and configuration of Windows XP.

Read MoreHow to Optimize XP Processes/Services for the Acer Aspire One

How to Create a Custom Windows XP for the Acer Aspire One Using nLite.


I love my Acer Aspire One. I originally planned on purchasing one of the new MacBook Pro’s and bought the Aspire One simply to take notes in class. However, I really see no need to blow more money on a full-sized notebook anymore. The only downside to my Aspire is that I got the 110L with the 8GB solid-state hard drive.

I’ve gone through many operating systems on my AAO, and while Ubuntu is definitely my favorite, it’s just not up to where I need it to be. The battery life is only around 2 hours, 3D doesn’t work properly in 8.10, and the wifi would crap out sometimes among other things. The only real option for me is Windows XP and I’ve installed many different versions of that as well, ranging from stock SP3 installs to nLite installs posted elsewhere on the Internet.

Until now, I’ve never really been happy with the end result. A stock XP install was way too bloated and required a lot of work to remove components and tweak services and settings to work well on the AAO’s limited screen and HDD space; yet some of the custom versions I attained had features like Remote Desktop missing which I use frequently to connect to servers on my home network. Anyway, enough with the background story, I finally bit the bullet and created my own custom "Acer Aspire One" version of Windows XP using nLite. I based a lot of my removal of components off a similar guide for the Asus EEE PC here. The install ended up taking up about 600MB (down from 1.2GB) with 18 initial processes running and just under 80MB of page file usage.

Read MoreHow to Create a Custom Windows XP for the Acer Aspire One Using nLite.

How to Fix the Canon Pixma iP1500 “Waste Ink Absorber Full” Error.

A friend of mine really likes his Canon Pixma iP1500 printer. The ink is very cheap when bought from certain places (*cough* China *cough*); unfortunately though, the printer has been discontinued for some time. When my friend’s printer finally kicked the bucket and started giving him the dreaded "Waste Ink Absorber Full" error, it was thought that although the error can be bypassed temporarily, the only long-term solution was to buy a used printer off of eBay.

After buying several printers off of eBay, he came to me and asked me to take a look into the problem. After spending much time researching the problem on the internet, I learned of how the printer could have its on board firmware reset using a program and decided to dissect the printer to see if there was a way to actually clean out the ink absorbers. The process is really quite easy if you’re comfortable taking things apart and know what you’re doing, but can be a real drag if you don’t know where the pads are located.

I’ve now taken apart, cleaned, and reset several of my friend’s old Pixmas and they work like new. Below are a couple of videos I made showing how to physically take apart an iP1500 and clean the ink absorbers as well as how to reset the printer’s "print-count" to zero, making it think that it’s brand-new.

Read MoreHow to Fix the Canon Pixma iP1500 “Waste Ink Absorber Full” Error.